How to Unclog a Toilet without a Plunger – DIY Guide

Often the toilet gets clogged and funny enough; it sometimes happens when you don’t have a plunger or when your drain snake is missing. Usually, it is when this happens that you will realize that your plunger is nowhere to be found.

Well, when you run into such a situation, there is no reason to fret or panic. You are not alone. It is a common problem. There are several techniques to unclog your toilet without the use of a plunger and some of them have been outlined right below. Remember, when your toilet is clogged, your main aim is to get the sludge dissipated. Here are some effective strategies.

9 Ways Unclog a Toilet without a Plunger

Prevent flooding

If your toilet is clogged, don’t make the mistake of pouring more water as water may not be able to dissipate the clog. It will only lead to an overflow. In this situation, the first thing to do is to prevent flooding from the water closet.

Open the closet and raise the float. You can also turn off the water valve to prevent more water from entering the toilet. Once it is turned off, water will cease from entering the toilet tank/closet. After that, you can apply any of the methods below to unclog your toilet.

Use of Liquid Dishwashing Soap

Squeeze several drops of your liquid dishwashing soap into your toilet bowl, or you can use shampoo instead of dishwashing soap. The way the liquid dissolves grease in the sink is the same way it will dissipate the fat inside the clog.

Add 4 to 5 cups of hot water into the bowl to activate the soap and wait for about 20 minutes before you turn on the water valve and flush the toilet.

Use of Liquid Dishwashing Soap

Use of Bar Soap

You can also use bar soap for this. However, you have to bear in mind that this method is not so useful. To adopt the method, you should cut the soap into tiny bits so that they can dissolve fast and pour it into the clogged toilet bowl. Pour about 5 cups of hot water into the bowl and wait for about 30 minutes before you flush.

Use of Hot Water

You can heat up about 5 cups of water or run it from your bathtub. The water should be warm but not up to the boiling point as that could crack your toilet bowl. Pour the water into the bowl and wait for about 5 minutes for the water to dissipate the fat and eventually break up the clog. You can then flush the toilet.

It is important to keep your hand on the float while flushing so that you can quickly raise the float to prevent an overflow if the method does not work. It is needless to remind you that if the clog does not break, water will begin to build up. You don’t want to add a dirty bathroom to the problem.

Use of Household Bleach

Pour about 3 cups of household bleach into your toilet bowl and add 4 cups of hot water. Wait for about 20 minutes for the bleach to react with the clog and dissipate it. As it is dissipating it, you will see little bubbles in the clog.

You could also add a cup of powdered soap to the mixture to boost its effectiveness. After that, you can turn on the water valve and flush the toilet.

Use of Household Bleach

Use of Wire Hanger

You can cut a wire hanger with a wire cutter and straighten it Put on a pair of hand gloves and begin to dip the straightened wire hanger into the toilet bowl to physically dissipate the clog. It is advisable to use a plastic coated wire hanger to avoid scratching your porcelain toilet bowl.

The end of the wire hanger should be stuck into the toilet bowl. Move the wire hanger around to force the clog to dissipate faster. When it starts to break down, you will notice it. You can then remove the wire hanger and flush your toilet.

Use of Epsom Salts

While this may not be as powerful as others, it has worked for some people. In fact, it is believed that it works for the mild clog in the toilet. Just pour some Epsom salts in the toilet bowl and wait for about 10 minutes. It will react with the sludge and dissipate it. You can then turn on the valve and flush your toilet. However, this may not work for the serious clog. As an alternative, some people make use of a mixture of baking soda and Epsom salts.

Use of the Combination of Baking Soda and Vinegar

Pour a cup of baking soda into your toilet bowl cleaner. Pour a cup of white vinegar into the toilet bowl immediately after and wait for about 5 minutes for the substances to react with the clog before you pour a kettle of hot water into the toilet bowl. You can then wait for another 10 minutes before turning on the valve and flushing the toilet.

How to Unclog a Toilet without a Plunger

Use of Toilet Brush

If all the strategies do not work, then you will have to push it physically with the use of a toilet brush. You will stick the brush into the toilet bowl and stir it around until it breaks and you can then flush it

Bottom Line

In conclusion, prevention is always better and cheaper than cure so the best way to unclog your toilet is to prevent it from clogging. Although there are several causes of a clogged toilet, the most common one is when you try to flush wrong items. Remember that only toilet paper and human waste can be flushed.

Items like paper, floss, wet pipes, cotton balls, and Q-tips are non-flushable. So, you should educate your kids and other occupants of your apartment on items that are flushable and the ones that are non-flushable. Doing this will reduce the chances of having a clogged toilet.

You should also bear in mind that not all clogged toilets can be fixed with a DIY method. You cannot fix clogged toilet caused by faulty sewer line, blocked plumbing vent, or clogged trap. You have to call a professional plumber for these ones.

You May Like To Read:

Small Bathroom Decorating Ideas

How To Clean A Bathroom Floor

How to Install a Shower Pan – DIY Guide

How to Clean a Toilet Tank – DIY Guide

How To Clean Shower Head – DIY Guide

How To Replace Two Handle Shower Valve

Leave a Comment