Clogged shower heads are a common problem in almost all households. You might have noticed this with your shower when it sprays water unevenly. It is caused by mineral deposits dissolved in the water that build up. This leaves you with low water pressure which does not feel good at all.
Happily, there are many ways to clean your shower head. They are quite easy and won’t consume much of your time. To keep water flowing forcefully from your showerhead, choose one among the various methods below of how to clean shower head.
How To Clean Shower Head
Soak Shower Head in White Vinegar
This is the most preferred method when cleaning the shower head. It is quite easy and requires minimum effort. After removing the shower head from the water pipe, soak it in white vinegar when you go to work in the morning or at night when you go to sleep and after a few hours, the shower head will be as good as new.
Rinse it thoroughly to clear out the vinegar and re-attach it to the water pipe. If you do not want to remove the shower head from the water pipe, you can choose a plastic bag with white vinegar and wrap it around the shower head. You can use a tape or rubber band to keep it intact.
You could also get rid of the mineral deposits on your shower head by simply scrubbing it. A toothbrush is highly recommended if you opt for this method.
Gently scrub the nozzles with the toothbrush but you should be careful not to scrub the soft rubber aggressively since it can affect its performance. Also, do not use strong chemical agents because they too can damage the nozzles.
Cleaning the Filter Screen
The filter screen is located on the part of the shower that connects to the water pipe. To access it, you have to go through the rain shower head manual.
If you do not have one, you can contact the manufacturers who will guide you on how to do so. You will have to detach the shower head from the water pipe to access the filter screen. You can use tweezers to get the screen out of the pivot ball.
Once it is out, you can use a toothbrush to scrub mineral deposits off the filter screen gently. You can also run some water on the filter screen. This too will work just as precise.
Soak Shower Head in Baking Soda
Mix water with baking soda and after detaching the shower head from the water pipe, soak it for one hour in the mixture. Take it out of the mixture and scrub it with a toothbrush.
A pin could also come in handy to remove dirt from the small holes of the showerhead. Not only does baking soda unclog, but also makes your showerhead look new by bringing back its shine.
The only negative aspect of this process is that not all metals react well with baking soda. So you are advised to research on the metal used in manufacturing your shower head before proceeding with this method.
Recommended Guide: How To Clean A Bathroom Floor
Scrub with Lemon
Lemons are acidic in nature and this makes them suitable for cleaning shower heads. After you have removed the shower head, scrub it with lemon and then later use a toothbrush to clean the holes.
You can also sprinkle salt on the lemon before scrubbing the shower head. Clean it with hot water and shower cleaner to rinse it as well as unclog it
If you choose this method, there are two things you need to do. Firstly, wear gloves since it is bad for your skin. Secondly, put on a mask since the oven cleaner is quite scented. After doing so, unscrew the shower head and place it on a table. Spray it with the oven cleaner. Wait for 30 minutes then rinse it thoroughly. This will leave it clean.
You should clean your shower heads regularly to ensure that they remain unclogged and clean. Shower heads that spray water unevenly are quite annoying and irritating. This could be avoided by following some simple steps. These are among the most natural techniques out there for cleaning shower heads and unclogging them.
You do not have to call the plumber every time your shower head starts malfunctioning now that you have the necessary tips to deal with the situation.